* This is not a full list of publications, just the most shared.
A Web Based Real-Time 3D Simulator for Ship Design Virtual Prototype and Motion Prediction (COMPIT 2016, Lecce, Italy), Olivia Chaves, and Henrique M. Gaspar
HM Gaspar, PO Brett, A Ebrahim, A Keane, “Lifecycle properties of Stability – beyond pure technical thinking“, Proceedings of the 12th International Conference on the Stability of Ships and Ocean Vehicles (STAB), 14-19th June 2015, Glasgow, UK.
GASPAR, H. M., BRETT, P. O., ERIKSTAD, S.O., ROSS, A. M. “Quantifying robustness of OSV designs taking into consideration medium to long term stakeholders’ expectations” 12th IMDC Tokyo, 2015
EBRAHIMI, A., BRETT, P.O., KAMSVÅG, Ø., GASPAR, H.M. and GARCIA, J.J., “Parametric OSV Design Studies – precision and quality assurance via updated statistics”, 12th IMDC, Tokyo, 2015
EBRAHIMI, A., BRETT, P.O., GASPAR, H. M., GARCIA, J.J, KAMSVÅG, Ø., Better decision making to improve robustness of OCV designs. 12th IMDC Tokyo, Japan (2015)
A Keane, HM Gaspar, PO Brett, “Epoch Era Analysis in the Design of the Next Generation Offshore Subsea Construction Vessels”, 10th International Conference on System of Systems Engineering (SoSE) 2015 (San Antonio, TX, USA)
Fonseca, Í. A. and H. Gaspar. 2015. “An Object Oriented Approach for Virtual Prototyping in Conceptual Ship Design”. Proceedings ECMS 2015. Varna.
Chaves, O., Nickelsen, M. & Gaspar, H. M., 2015. Enhancing Virtual Prototype in Ship Design Using Modular Techniques. ECMS.
Andrade, L. S.; T. G. Monteiro and H. M. Gaspar. 2015. “Product Life-Cycle Management in Ship Design: from Concept to Decommission in a Virtual Environment”. In Proceedings 29th ECMS. Varna.
Hugo L. Vidal, Henrique M. Gaspar, Lucas Weihmann, Luiz E. B. Minioli, “A Parametric Model for Operability of Offshore Support Vessels via Configuration-Based Design”, Marine Systems & Ocean Technology Journal, Vol. 10, Num. 1 – DOI 10.1007/s40868-015-0001-8 (2015).
Introduction to HIALS and the Ship Lab for Brazilian students interested in MSc in Ship Design, TG Monteiro, HIALS (2014)
Internship Opportunities at Ship Lab for CSF Students, HM Gaspar, HIALS (2014)
Data-Driven Documents (D3) applied to Conceptual Ship Design Knowledge, HM Gaspar et al., COMPIT UK 2014
Challenges for Using LNG Fuelled Ships for Arctic Routes, HM Gaspar et al., OMAE San Francisco, 2014
Hugo L. Vidal, Henrique M. Gaspar, Lucas Weihmann, Luiz E. B. Minioli, “A Parametric Model for Operability of Offshore Support Vessels via Configuration-Based Design”, 25th SOBENA, Rio de Janeiro, Brazil (2014).
Gaspar, H. M., Balland, O., Aspen, D. M., Ross, A. M., Erikstad, S. O. “Assessing Air Emissions for Uncertain Lifecycle Scenarios via Responsive Systems Comparison Method,” Part M: Journal of Engineering for the Maritime Environment (NTNU research) (2014)
ÉMIS – Effective Ship Design, Engineering and Fabrication: – Facilitation of beyond state of the art modular and standardized ship design, engineering and fabrication approaches, HM Gaspar, Brett, PO, Hildre, HP – BIP project application (2013)
Data-Driven Documents (D3) applied to Conceptual Ship Design Knowledge, HM Gaspar, PO Brett, A Ebrahim, A Keane, COMPIT 2014 (UK)
Data-Driven Documents (D3) applied to Conceptual Ship Design Knowledge – Online Examples , HM Gaspar, HIALS (2014)
Challenges for Using LNG fueled Ships for Arctic Routes, Gaspar, H.M., Ehlers, S., Æsøy, V., Erceg, S., Balland, O. and Hildre, H.P., in OMAE 2014, San Francisco, CA, USA
Simplified OSV Parametric Design MethodologyApplied for Ulstein International SA Case, HM Gaspar, Ulstein Internal Report (2013)
Comments for Report “Hull Vision PSV – Parametrics Study and Benchmark Analysis, Rev .01” by Ulstein International, Ulstein Internal Report (2013)
Lifecycle Model for LNG fueled Ships Operating in the Arctic via Epoch-Era Analysis, HM Gaspar, HIALS (2014)
Courses (AMO Master Program)
Best Practice in Systems Engineering – Fall 2014 – Lecture Notes